Embellish Foolproof Repositionable Webbing 20″ x 5 yd

Embellish™ Foolproof Repositionable Webbing is for use when creating appliqué designs for sewing, machine embroidery or digital cutting and is Ideal for accurate placement of intricate patterns. This webbing is machine washable, dry cleanable and leaves a very soft, flexible hand to your fabric without gumming up the needle.

What makes Embellish™ Foolproof Repositionable Webbing truly unique is that one side is sticky and can be finger pressed into place, removed and placed repeatedly until your appliqué is perfectly centered.

Traditional Appliqué using Embellish™ Foolproof Repositionable Webbing:

1. Trace or print (using ink jet printer) the design to be appliquéd onto the protective paper side of Embellish™ Foolproof Repositionable Webbing.  *Remember to use the “reverse” of the image.

Tip! Use a light box or trace at a window for accuracy!

1. Trim around the image leaving at least ¼” inch of Embellish Foolproof Repositionable Webbing outside the traced lines.
2. Fuse Embellish™ Foolproof Repositionable Webbing to the wrong side of decorative fabric using a medium/high temperature on your iron (No Steam). The fusible side of Embellish™ Foolproof Repositionable Webbing is the soft/shiny side.  Hold the iron in place for at least 3 seconds and then flip the piece over and press again on the fabric side.
3. After it has cooled, cut out the appliqué design using the trace lines.
4. Peel back the protective sheet to expose the sticky surface.
5. Position the appliqué piece on the garment and press in to place using a medium/high iron temperature. Hold the iron to the appliqué for at least 3 seconds.  *Press on the appliqué side and the fabric side for maximum bonding.
6. Finish by stitching around the appliqué with a satin or decorative stitch.