Directions for Use and Care
FOR STABILIZING A T-SHIRT QUILT BLOCK:
- To extend glue stick, hold the fluted grip and turn the barrel clockwise.
- Lightly press the glue stick to edge of fabric and guide along length.
- Press down the top fabric to adhere the two pieces.
- Always replace cap to avoid the glue stick drying out.
- See illustrations below for inserting refills.
FOR STABILIZING EMBROIDERY ON KNIT:
- Cut Select Cutaway at least one inch larger than the size of the embroidery frame intended for use.
- Place the fusible side of Select Cutaway to the wrong side of the fabric or garment. *If the design is dense or large, place a second layer at a 45 degree angle, directly over the first piece.
- Cover the Select Cutaway with a pressing cloth or piece of cotton.
- Press using a medium iron temperature (wool).
- Place the now stabilized fabric within the hoop and stitch.
- Once the embroidery is complete, pull the stabilizer back to the design and trim away the excess. It may be necessary to reheat the stabilizer in order for it to release from the fabric.
WASHER AND DRYER SAFE
Cool water and low drying temperature recommended. Press using a low to medium setting on your iron and press cloth. Do not touch the iron directly to the stabilizer.
